All vehicles – din head unit provisions – Metra Electronics AW-200GM User Manual

Page 31

Kit Assembly 99-2001, AW-200GM

All vehicles – DIN head unit provisions

(Figure A)

(Figure B)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.
Note:When installing a DIN head unit

you will need to cut and remove the

shaft supports in the radio housing.

(Figure A)

2. Slide DIN cage into the Radio Housing

and secure by bending metal locking

tabs outward. (Figure B)

3. Slide radio into DIN cage. (Figure B)
4. Reassemble dash in reverse order

of disassembly.