McIntosh MS300 - Manual (Page 30)

PAGE 26
MS300 User
’s Manual
hard drive.
Note: The MS300 needs to be connected, via the Ethernet
Jack, to an active computer network with access
to the Internet for the Quick Lookup Feature to
retrive the Album Title and Track Names.
Automatic Bulk Recording
The MS300 can automatically record every single CD from an
external changer, one by one (in real time) using the Record Discs
feature.
Follow these steps once your changer is loaded with CDs and they
have been identified by Quick Lookup:
1. Press the SETUP key on the remote control to display the
Setup Menu.
2. Select the CHANGER MANAGEMENT menu item.
3. Select the RECORD DISCS menu item.
4. Select the QUICK RECORD menu item.
Quick Record will first determine which discs have been added to
the changer and then figure out which ones have NOT already been
recorded and proceed with recording these discs to the internal hard
drive.
Quick Record will record all tracks from each CD. If you only want to record select tracks from one or more CDs,
refer to the section “Select Tracks to Record” below.
• When recording is complete, the MS300 will return to the Music Guide.
• Refer to the section “Setting User Preferences” for setting Recording Preferences and Disc Insert Preferences.
Select Tracks to Record
You can select which CDs and which tracks you want to record by following these steps:
1. Press the RECORD key on the remote control to display the Recording Options Menu.
MUSIC ON THE MS300