Motorola m250 - Manual (Page 48)

FM Tuner
Use the options in the FM Tuner menu to control the player’s FM setup.
1 Open MENU by pressing Thumbstick to .
2 Move Thumbstick to select Settings.
3 Press Thumbstick in.
4 Move Thumbstick to select FM Tuner.
5 Press Thumbstick in. The Options bar will be highlighted; press Thumbstick in again.
6 The Stereo and Region options will appear with the current modes displayed and the Stereo setting blinking.
7 Press Thumbstick either Forward ( | ) or Reverse ( | ) to change the Stereo option, then press Thumbstick
down to select the Region setting, which will start blinking.
8 Press Thumbstick either Forward ( | ) or Reverse ( | ) to change the option to the area where you will be
using the m250/m500. Press Thumbstick in to set that option, which will stop blinking.
9 Press Forward ( | ) to save settings and Reverse ( | ) to cancel them. Either a check mark (accepted) or an
X (canceled) will appear on the screen. If accepted, you will return to the screen shown before you started this
task; if canceled, you will see the Options bar screen again. Press Reverse (
| ) to go back to the Settings
menu.
FM Tuner options include:
• FM Stereo Mode
Options include On (the default setting) and Off. Selecting Off will place the tuner in mono mode. This may help
eliminate any hiss heard on distant stations.
• Region
Options include USA (tunes by .2MHz, the default setting), Japan (tunes by .05 MHz), and Europe (tunes by
.05MHz).
m250/m500 DIGITAL AUDIO PLAYER 48