Milan Technology MIL-SM8002TG - Manual (Page 24)

16
show accounting
Privileged
EXEC
Show username & password
Switch# show accounting
Username: root
Password: root
show version User EXEC
Use the show version user EXEC
command to display version
information for the hardware and
firmware.
Switch> show version
Firmware version: 1.0
Hardware version: 3.0
Kernel version: 1.10
show terminal
Privileged
EXEC
Use the show terminal command
to display console information for
the switch
Switch (config)# show
terminal
Baud rate (bits/sec):
9600
Data Bits: 8
Parity Check: none
Stop Bits: 1
Flow Control: none
Port Commands Set
Commands Command Level Description Defaults Example
Use the fast Ethernet interface
configuration command
Switch (config)# interface
fastEthernet 0/1
interface [FastEthernet
/module Ethernet] [slot
id] [id]
Interface
configuration mode
Use the module Ethernet
interface configuration
command
Switch (config)# interface
moduleEthernet 1/1