MITSUBISHI ELECTRIC HS-S8300E(BRS) - Manual (Page 8)

8
11 – 11 – 99 09 : 21 : 01
3H
1M
OFF
1
SHOT
ALARM REC MODE
ALARM REC DURATION
EMERGENCY REC
ONESHOT•FIELD
ONESHOT•INTERVAL
WRNG•TAPE END
REC- 1
REC
SERIES
CALL OUT
CLOCK OUT
MODE OUT
REC IN
0
0H
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALIZE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
< REPEAT REC TIMES>
< ELAPSED TIME>
< FIRST TIME SET UP>
TAPE END
QUASI V-SYNC
TAPE LENGTH
VIDEO MODE
PB HEAD SELECT
BUZZER
TIME DATE ADJUST
RS-232C STOP
ON
E-180
COLOUR
NORMAL
WRNG
OFF
11
11
99
09 :21 : 01
15:00
23
FORWARD
TIME
DATE
DIRECTION
Use JOG to adjust,
and ENTER.
1
SMALL
ON
11 - 11 - 99 09 : 21 : 01
DISPLAY MODE
TIME DATE SIZE
BLUE BACK
Ex.
DW START END HR
SPL 08 : 40 17 : 10 L12SP
2 SAT 08 : 40 12 : 20 L12SP
3 WED 22 : 00 22 : 54 3SP
4 - - -
- - : - - - - : - - - - -
5 - - - - - : - - - - : - - - - -
6 - - - - - : - - - - : - - - - -
7 - - - - - : - - - - : - - - - -
8 - - - - - : - - - - : - - - - -
SPECIAL DW MON–FRI
< ALARM LIST>
ALL MENU INITIALIZE
Turn the SHUTTLE RING <<
then all MENU will be
initialized.
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING <<
then POWER LOSS LIST
will be cleared.
ALARM LIST CLEAR
Turn the SHUTTLE RING <<
then ALARM LIST will be
cleared.
0001 01 - 05 - 99 01 : 00
0002 01 - 07 - 99 21 : 10
0003 01 - 10 - 99 09 : 15
< POWER LOSS LIST>
01 01 - 03 - 99 01 : 00
02
03
DAYLIGHT SAVINGS
DATE
MONTH
YEAR
TIME
< TIME DATE ADJUST>
TRANSMISSION RATE
DATA BIT LENGTH
STOP BIT LENGTH
PARITY BIT
DELIMITTER
DELIMITTER
VCR ADDRESS 1200
8BIT
1BIT
NONE
CR
CR
NONE
SETTING THE MENUS
1
Press the DISPLAY button.
• The “MAIN MENU” is displayed.
2
Turn the JOG dial to select the desired item.
• When the JOG dial is turned to the right, the cursor moves downward.
• When the JOG dial is turned to the left, the cursor moves upward.
3
Turn the SHUTTLE ring to the right.
• The desired item is selected and the menu will appear.
4 Turn the JOG dial to select item.
5 Turn the SHUTTLE ring to the right and the setting item will flash.
6
Turn the JOG dial to change the setting.
7
Turn the SHUTTLE ring to the right to set.
8
Press the DISPLAY button.
• The present time display will appear.
The operating parameters of this VCR are set through various on-screen menus.
Set the menus as follows:
OPERATION
Present Time Display