Using with the personal computer – MITSUBISHI ELECTRIC HS-S8300E(BRS) User Manual
Page 32
32
2
2
2
2
2
When controlling two or more VCRs from a personal computer, the "VCR ADDRESS" of each VCR is set to the different
address (from VCR01 to VCR16, except NONE). ( Refer to page 29, item 7.)
•
Input the "VCR ADDRESS (eg.VCR01)" that you want to control and the ", (comma)" before inputting the command code.
•
When you want to control all connected VCRs, inputs the "ALL" and ", (comma)" before inputting the command codes.
1. Command: Command codes from outside to the VCR.
2. Status: Response codes from the VCR to outside.
Format:
Format:
• • •
,
,
,
VCR ADDRESS
Parameter
2
Parameter
1
Status
• • •
,
,
Command
Codes
,
VCR ADDRESS
or ALL
Parameter
1
Parameter
2
,
Parameter
n
Delimitter
#1
,
Parameter
n
Delimitter
#2
N
#1: When you set "DELIMITTER
When you set "DELIMITTER
#2: When you set "DELIMITTER
When you set "DELIMITTER
inputted.
[Example 1]
Fast forward the tape in the VCR of the ID number VCR02. (When the DELIMITTER
DELIMITTER
[Example 2]
Set the clock of the all VCR connected to 12:27. (When the DELIMITTER
of the RS-232C menu is set to CR.)
USING WITH THE PERSONAL COMPUTER
Sending commands
from the PC etc.
Meaning
ALL,SC12,27
CR
VCR01, RC
CR
VCR01, EX
CR
VCR02, RC
CR
VCR02, EX
CR
•
•
•
VCR16, RC
CR
VCR16, EX
CR
Status or error code from the
VCR to PC etc.
Command for recording
Command received (VCR01)
Command carried out (VCR01)
Command received (VCR02)
Command carried out (VCR02)
•
•
•
Command received (VCR16)
Command carried out (VCR16)
•
CR , which indicates carriage return code (0DH).
•
The order and number of the status responses from the VCRs to the PC or other controller may vary dependent upon the
number of VCRs and the ID number settings.
Sending commands
from the PC etc.
Meaning
VCR02,FF
CR
VCR02, RC
CR
VCR02, EX
CR
Status or error code from
the VCR to PC etc.
Command for fast forwarding (VCR02)
Command received (VCR02)
Command carried out (VCR02)
•
CR , which indicates carriage return code (0DH).