Siemens CF62 - Manual (Page 98)

©
Siem
ens AG
2003, I
:\Mob
il\R6
5\CF62_Le
op
ar
d_
ab
gel._v
on
M
C60_M
aguro
\e
n\_v
on
_i
tl\fug\
CF62
_fug_en_040422\A65_
fa
q.
fm
97 Questions & Answers
VAR Langua
ge: English; VA
R issue
da
te
: 1
0-Fe
bruar
-2004
right page (97) of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
Text message
cannot be sent.
Service provider does not sup-
port this service.
Contact your service provider.
Phone number for service cen-
tre not set or incorrect.
Set service centre (page 48).
SIM card contract does not
support this service.
Contact your service provider.
Service centre too busy. Repeat message.
Recipient does not have a com-
patible phone.
Check.
EMS pictures &
sounds are not dis-
played on the des-
tination phone
Destination phone does not
support the EMS standard.
No Internet ac-
cess possible.
Incorrect WAP profile set, or
wrong or incomplete settings.
Check settings or contact your service provider.
PIN error/
PIN2 error.
Three wrong entries. Enter the PUK (MASTER PIN) supplied with the SIM
card according to the instructions. If the PUK (MAS-
TER PIN) has been lost, please contact your service
provider.
Phone code error. Three wrong entries. Contact Siemens Service (page 98).
Service provider
Code error.
No authorisation for this serv-
ice.
Contact your service provider.
Too few/too many
menu entries.
Functions may have been add-
ed or deleted by the service
provider via the SIM card.
Check with your service provider.
No fax possible. Wrong settings in the PC. Check settings (page 74).
No authorisation for this
service.
Contact your service provider.
Charge meter
does not work.
Charge pulse is not transmit-
ted.
Contact your service provider.
Damage
Severe shock. Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became
wet.
Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry con-
nector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the
phone!
Problem Possible causes Possible solution
Reset all settings to factory default (page 76): * # 9 9 9 9 #
A