Siemens CF62 - Manual (Page 75)

©
S
ieme
ns
AG
2003, I:\Mobil
\R65\C
F62
_Leo
pard_abg
el._von MC
60_Maguro\en\_v
on
_itl
\fug\C
F62_
fug_
en_
040422\A
65_S
etup
.fm
Setup 74
VAR Langua
ge: English; VA
R issue
da
te
: 1
0-Fe
bruar
-2004
left page (74) of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
§Save§ Save settings.
§Menu§
KmK
Connectivity
K
Select function.
HTTP profile
I
Select profile.
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be ena-
bled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
E
Set the required mode.
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following function is available
for two seconds:
§Voice/fx§ Switch to Send voice/fax
mode; you may now send
a fax.
Rec voice/fax
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connection).
End transmission
End transmission with PC software
and/or press
B
.
Rec fax/data
b
Your service provider has given you
a number for telephoning and a fax/
data number.
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed.
Now start the communication pro-
gram in your PC to receive the fax/
data.
APN: Enter service provider
address.
Login name: Enter login name.
Password: Enter password (shown
as a series of asterisks).
DNS1 /
DNS 2:
(optional).