Siemens CF62 User Manual
Page 71
©
S
ieme
ns
AG
2003, I:\Mobil
\R65\C
F62
_Leo
pard_abg
el._von MC
60_Maguro\en\_v
on
_itl
\fug\C
F62_
fug_
en_
040422\A
65_S
etup
.fm
Setup
70
VAR Langua
ge: English; VA
R issue
da
te
: 1
0-Fe
bruar
-2004
left page (70)
of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress.
If
Call waiting
is activated (page 69),
you will hear the call waiting tone
during a call.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
s
Display if status is
unknown (e.g. with
a new SIM card).
Clear all
b
All set diverts are cleared.
Additional information
Note that the divert is stored in the network
and not in the phone (e. g., when the SIM
card is changed).
Check condition or delete it
First select the condition.
§Select§
Press.
Check status
Select.
Or
Delete
Select.
Reactivate divert
The last divert has been stored. Proceed as
with "Set divert". The stored phone number
is displayed. Confirm phone number.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
§Delete§
Press. The phone number is
deleted.
Enter new number and confirm.