Installing the telephone for voip – Motorola SURFBOARD SVG2500 User Manual
Page 68

2 INSTALLATION
53
Installing the Telephone for VoIP
Your SVG2500 allows you to use your cable Internet connection for VoIP telephone
service. You must contact a VoIP service provider for this feature to work with the
SVG2500. You can connect up to two standard telephone lines using your SVG2500.
Caution!
Connect your telephone by plugging a phone wire into the
TEL 1/2
connector, as
shown in the illustration below. You can also connect a second telephone line to the
TEL 2
connector. A two-line telephone may be connected to TEL 1/2.
To reduce the risk of fire, use only No. 26 or larger UL Listed or CSA Certified
Telecommunication Line Cord or national equivalent to connect a telephone line
to your SVG2500.
Contact your service provider before connecting your Motorola SVG2500 to your
existing telephone wiring. Do not connect the telephone wire to a traditional
telephone (PSTN) service.
Be sure the phone connectors are neither connected together nor connected to
wall jacks on the same network.
Use only a standard telephone. In many businesses, digital phones that connect
to a private branch exchange (PBX) do not operate with the SVG2500.