Connecting a pc to the svg2500 usb port, Obtaining an ip address for an ethernet connection, Obtaining an ip address for an ethernet – Motorola SURFBOARD SVG2500 User Manual
Page 46: Connection
2 INSTALLATION
31
Connecting a PC to the SVG2500 USB Port
You can connect a single PC running Windows 2000, Windows XP, or Windows Vista
to the SVG2500 USB port.
Caution!
Before plugging in the USB cable, be sure the SVG2500 Installation CD-ROM is inserted in
the PC CD-ROM drive.
To connect a PC to the SVG2500 USB port:
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive to install the USB
driver. See
for the applicable procedure for the Windows
version you are running.
2. Connect the USB cable to the USB port on the back of the SVG2500.
3. Connect the other end of the USB cable to the USB port on the computer.
Obtaining an IP Address for an Ethernet Connection
You can use either of the following two options to obtain the IP address for the
network interface on your computer:
• Retrieve the statically defined IP address and DNS address
• Automatically retrieve the IP address using the Network DHCP server
The Motorola SVG2500 gateway provides a DHCP server on its LAN. It is
recommended that you configure your LAN to obtain the IPs for the LAN and DNS
server automatically.