Motorola SURFBOARD SVG2500 - Manual (Page 117)

9 SVG2500 WIRELESS PAGES
102
Field Description
Auto will provide the best performance in nearly all situations.
Output Power Sets the output power as a percentage of the hardware's
maximum capability.
Beacon Interval Sets the beacon interval for the AP. The default is 100, which is
fine for nearly all applications.
DTIM Interval Sets the wakeup interval for clients in power save mode. When a
client is running in power save mode, lower SVG2500N-2.1.1.0-
LAB-00-SH.bin values provide higher performance but result in
decreased client battery life, while higher values provide lower
performance but result in increased client battery life.
Fragmentation Threshold Sets the fragmentation threshold. Packets exceeding this
threshold will be fragmented into packets no larger than the
threshold before packet transmission.
RTS Threshold Sets the RTS threshold. Packets exceeding this threshold will
cause the AP to perform an RTS/CTS exchange to reserve the
wireless medium before packet transmission.
Wireless Bridging Page
This page allows you to configure the WDS features.
Field Description
Wireless Bridging Enables or disables wireless bridging.
Remote Bridges Table of remote bridge MAC addresses authorized to establish a
wireless bridge. Up to four remote bridges may be connected.
Typically, you will also have to enter your AP's MAC address on the
remote bridge.