Midland Radio WR-300 - Manual (Page 31)

30
button. The MEMORY # will flash on the display. Use the UP
or DOWN buttons to find the memory channel you wish to
program. Press SELECT button to set the memory channel to the
frequency you selected.
Button press Beeps
When a button is pressed with the “Max / Volume / Off” switch
ON, the WR-300 emits a beep sound. One beep represents that the
WR-300 has received a command and has taken effective action.
Two beeps represents the command is not valid (wrong button
pressed) and no action is taken.
TROUBLESHOOTING & HELP:
Problem Suggestion(s)
No power. Ensure that the wall power
adapter is connected to AC
power, that the cord to the radio
is securely seated in the radio
and that a fresh back-up battery
is installed (if AC power has
failed).
No sound. Check VOLUME setting
No weather broadcast when
you press WEATHER
Ensure that telescoping antenna
is fully extended.
If you are using an external
antenna, ensure that it is
connected properly.