Midland Radio WR-300 - Manual (Page 14)

13
b. Press “MENU”.
c. Press up (or down) directional arrow until “WEATHER
CHANNEL” is displayed on the LCD.
d. Press “SELECT”.
e. Press up (or down) directional arrow until you hear the
broadcast of your station. Be Sure Weather Radio Unit
volume is turned up sufficiently for you to hear broadcast.
f. Press “SELECT”.
5. ABOUT S.A.M.E. & THE COUNTY CODES.
S.A.M.E. - Is a feature in MIDLAND Weather Radios that
allows you to program in your county code or counties codes.
This will eliminate any Alerts that are not within your
programmed Specific Area. For example, if you only want to be
informed for alerts within your county just program in your
county code. But, if you want to be informed about counties that
are North, South, East and West of you, you can do so. Find the
county codes you want on the internet web site of NOAA
Weather Radio-County by County Coverage @
www.nws.noaa.gov/nw r/indexnw.htm.
You can also restrict what you hear on your Weather Radio to
alerts in which you have an interest. Program your Weather
Radio as explained in the “Programming” section in this manual.