Midland Radio WR-300 User Manual

Page 13

setting will begin flashing. (Note and adjust A.M./P.M. indicator

located to left of the flashing alarm hour setting.) Press and

release the “UP” arrow to adjust the alarm hour setting. Press and

release the “RIGHT” arrow to choose setting alarm minutes.

Press and release the “UP” arrow to adjust the alarm minute

setting. Press the “SELECT” button to store the Alarm settings.

Choose type of alarm. Press and Release “MENU”. Use “UP”

arrow to choose radio

or sound

for clock alarm. (The

icons are located below the clock display.) Press “SELECT” to

store the type of alarm setting.

To activate the alarm, set the “ALARM OFF/ON” switch to the

“ON” position. The clock face icon will appear. To cancel

the alarm when sounding, press a button other than “SNOOZE”.

The “SNOOZE” button on the top of the WR-300 is for

advancing the alarm time by 9 minutes each time the alarm

sounds. The “SNZ” icon will be displayed.

(Turn alarm off with the ”ALARM OFF/ON” switch on side of

unit.)

5. PROGRAM THE WEATHER CHANNEL FOR YOUR
AREA. After you select the weather channel in your area, your
Weather Radio will receive all alerts issued by the National
Weather Service. Program your Weather Radio with the weather
channel in your area as follows:

a. Turn on Weather Radio unit.