Midland Radio WR-300 - Manual (Page 30)

29
A should be entered as WATCH. Those codes ending in W
should be entered as WARNING. Those codes ending in S
should be entered as STATEMENT. Those codes ending in E
can be entered as watch or statement depending on the nature of
the emergency. Press SELECT key to confirm your entry.
Back Light of the Display
Pressing and releasing a button will turn on the back light for
about 5 seconds.
AM/FM radio use
The AM/FM radio built into the WR-300 can be used for listening
any time without interrupting the weather radio functions. If an
alert is received, the unit automatically switches off the AM/FM
sound and operates the weather radio alert functions you have
programmed. Press the RADIO button to turn on or off the radio.
Press the AM/FM button to switch between AM and FM.
AM/FM memory channels
You can program 3 AM and 3 FM memories for your favorite
stations. Use the UP and DOWN buttons to move between
memory channels. To tune to another station, use the LEFT or
RIGHT arrow buttons while the radio is on. You will see the
frequency display change as you hold the button or press it once
for each step of frequency.
Programming memory channels
To set the channel frequency of a memory channel, turn on the
radio and use the LEFT or RIGHT arrow buttons to adjust the
frequency to the channel you desire. Next, press the MENU