Maxon Telecom WL7 - Manual (Page 27)

27 PATENTS PENDING
19. If the ACTUATOR will
not lower Inboard
Rollstop at floor level,
unpin ACTUATOR
from the Closer Arm
(FIG. 27-1).
INBOARD
ROLLSTOP
THRESHOLD
PLATE
FIG. 27-2
PIN ACTUATOR AT
NEAREST HOLE
21. RELEASE WHEELCHAIR BRAKES
or SWITCH ON POWERED WHEEL-
CHAIR. Move wheelchair or ambula-
tory occupant inside the vehicle.
NOTE: If there are no occupants to
load on Platform, skip step 21.
CLOSER ARM
PIN
To prevent damage to Lift and vehicle, Inboard
Rollstop must be lowered on the Threshhold Plate
before stowing the Lift. If the Inboard Rollstop
does not automatically lower, it must be lowered
manually. If lowered manually, pin it in position as
close as possible to Threshhold Plate.
CAUTION
FIG.27-1
CLOSER
ARM
ACTUATOR
PIN
20. Manually LOWER the
INBOARD ROLLSTOP
to THRESHHOLD
PLATE (FIG. 27-2).
Then pin ACTUATOR
to nearest hole on
Closer Arm
(FIG. 27-2).
NOTE: If the Inboard Rollstop automatically lowered to
Threshhold Plate, skip step 19. Do not unpin
the Actuator.
STANDARD
POSITION