Maxon Telecom WL7 - Manual (Page 18)

18 PATENTS PENDING
OPERATING INSTRUCTIONS - Continued
POSITIONING OCCUPANT ON
PLATFORM AT FLOOR LEVEL
FIG. 18-1
4. Position wheelchair or
ambulatory occupant on
the center of platform
(FIG. 18-1).
SET WHEELCHAIR
BRAKES OR SWITCH
OFF POWERED
WHEELCHAIR.
5. Push the DOWN switch
on hand control (FIG.
16-1) to lower PLAT-
FORM to ground level
(FIG. 18-2).
LOWERING PLATFORM
TO GROUND
FIG. 18-2
6. If equipped, unfasten SEAT
BELT (FIG. 18-3) and place
on hanger provided.
7. RELEASE WHEELCHAIR
BRAKES or SWITCH ON
POWERED WHEELCHAIR.
Move wheelchair or ambula-
tory occupant into the
passenger unloading zone.
UNFASTENING SEAT BELT
FIG. 18-3
8. If equipped, make sure
SEAT BELT is fastened
(FIG. 18-4) with 3” - 4” of
slack in belt.
FASTENING SEAT BELT
FIG. 18-4