Maxon Telecom WL7 - Manual (Page 21)

21 PATENTS PENDING
MANUAL PUMP OPERATION
LOADING & UNLOADING OCCUPANT
OPERATING INSTRUCTIONS - Continued
1. Reposition latches to manually unfold the Lift as
follows. Raise latch off anchor pin (FIG. 21-2B) on LH
side of Lift. Position the standoff to hold latch in place
above the anchor pin (FIG. 21-2B). Repeat for latch
on RH side of Lift.
LIFT - BACK VIEW
FIG. 21-2A
REPOSITIONED
LATCH &
STANDOFF
FIG. 21-2B
LATCH
ANCHOR PIN
STANDOFF
NOTE: If possible, keep the Lift power ON/OFF switch
turned ON. In most cases, operating the Lift with
Manual Pump may be easier if power is ON.
Manual pump operating instructions for the Lift
are also located on Pump Cover. See DECALS
AND DECAL PLACEMENT in this manual.
If possible, apply power to
the Lift by turning ON
switch on the Pump Cover
(FIG. 21-1). The switch
is illuminated when
turned ON.
POWER SWITCH
(LH PUMP SHOWN)
FIG. 21-1
PUMP
COVER