Maxon Telecom WL7 - Manual (Page 19)

19 PATENTS PENDING
STOW LIFT FROM GROUND LEVEL
Push the FOLD switch on HAND
CONTROL (FIG.19-1) to close
PLATFORM (FIG. 19-2). Fold
operation will stop automatically
when completed.
STOW LIFT FROM VEHICLE FLOOR
FOLDING PLATFORM
UP INTO VEHICLE
FIG. 19-2
1. If equipped, fasten SEAT
BELT allowing 3” - 4” of slack
(FIG. 19-3).
HAND CONTROL
FIG. 19-1
2. Push the UP switch on
HAND CONTROL (FIG.
19-1) to raise PLATFORM to
vehicle floor level (FIG. 19-4).
FASTENING SEAT BELT
FIG. 19-3
RAISING LIFT UP TO VEHICLE FLOOR LEVEL
FIG. 19-4
3. Push the FOLD switch on
HAND CONTROL (FIG. 19-1) to
fold PLATFORM (FIG. 19-2).
Fold operation will stop automati-
cally when completed.
UP
UNFOLD
FOLD
DOWN