Maxon Telecom WL7 - Manual (Page 26)

26 PATENTS PENDING
18. Raise the PLATFORM as
follows. Insert MANUAL
BACKUP HANDLE in
Manual Pump actuator.
Pump the handle up and
down (FIG. 26-2) until
PLATFORM is raised up
even with the vehicle floor
(FIG. 26-4) and Inboard
Rollstop lowers to rest on
Threshhold Plate.
PUMPING MANUAL
BACKUP HANDLE
FIG. 26-3
RAISING LIFT TO
VEHICLE FLOOR
FIG. 26-4
Prevent the MANUAL BACKUP HANDLE from
getting damaged. Before you start pumping with
the HANDLE, line up notches on tip of HANDLE as
shown in FIG. 26-1. Then fully engage HANDLE
with Manual Pump as shown in FIG. 26-2.
CAUTION
HANDLE FULLY ENGAGED
FIG. 26-2
HANDLE - NOTCHES
LINED UP CORRECTLY
FIG. 26-1
NOTCHES LINED
UP VERTICAL
MANUAL PUMP OPERATION - Continued