MITSUBISHI ELECTRIC LT-4260 - Manual (Page 38)

37
Remote Control Functions: Overview of the TV Layer Buttons
Overview
(Figure 8, following page)
1-Slide Switch: Select A/V product to be controlled
by the remote control.
2-POWER: Turns power on and off for LCD Display
and other connected A/V products.
3-DEVICE: Select the input to view; Component,
Input, PC, or HDMI™.
4-VOLUME: Change sound level.
5-MUTE: Turn sound on or off.
6-TV MENU: Display on-screen menu
system.
7-ADJUST: Navigate menus, change settings, and
move the PIP on-screen location.
8-ENTER: Select a channel number or menu item.
9-HOME: Exit on-screen menus and return to TV
viewing.
10-INFO: Display on-screen summary of the current
input used and any broadcast information available
(including current Signal Source and Format).
Additionally, if you press the INFO key, it will display
sleep time.
11-AUDIO: Select the individual audio settings.
12-VIDEO: Select the individual video settings.
13-PIP CH: Scroll up or down through memorized
channels in PIP or POP.
14-PIP/POP: Cycle through PIP and POP display
choices.
15-EXCH: Exchange PIP or POP with the main TV
picture.
16-SLEEP: Set the LCD Display to turn off
within 2 hours. See Sleep Timer, page 39, for setup
instructions.
17-PIP DEVICE: Select the PIP or POP input
source.
18-FORMAT: Change the shape and size of the
main TV picture.
19-REC: Manually record with a VCR or recordable
DVD.
20-REW/REV: Rewind or reverse search with a
VCR, reverse scan with a DVD, or skip reverse with a
CD.
21-PLAY: Play a VCR, DVD, or CD.
22-STOP: Stop a VCR, DVD, or CD.
23-FF/FWD:
Fast forward or forward search with
a VCR, fast play with a DVD, or skip
forward with a CD.
24-PAUSE: Pause a VCR, DVD, AV Disc, or freeze
the PIP or POP image.