Set-back configuration setup – MITSUBISHI ELECTRIC LT-4260 User Manual

Page 17

Text mode
Original mode

Set-Back Configuration Setup

1. Place the 42" LCD Display on a sturdy surface.

2. Remove the HD-6000 Receiver/Controller from its carton.
3. Remove the protective material from around the HD-6000 and place it on a sturdy surface.

4. Turn the HD-6000 over so that the bottom is facing up and gently place it on the protective material.

5. Attach the 4 Mounting Hooks.

��

CAUTION

•

Do not remove the stand.

• The Display is heavy. Move it with two or more people.

When the HD-6000 is connected to the 42" LCD,
the HD-6000 front control buttons are inactive.
To control the HD-6000 (and 42" LCD), set the

remote control to the CABLE/DBS/DTV Layer
or use control buttons located on the side of the

LCD Display.