Multi-Tech Systems MVP200 - Manual (Page 30)

MultiVOIP Quick Start Guide
30
4. In the Port Address group, enter the IP Address and IP
Mask. In the Gateway Address group, enter the gateway
IP address for the client unit.
The IP address is your unique LAN IP address, and the
Gateway address is the IP address of the device
connected to the Internet/Intranet.
Click OK when you are finished. The Channel Setup
dialog box displays.
5. The Channel Setup dialog box defines the channel
interface, voice coder, fax parameters, and regional
telephone parameters for each channel.
Configure each channel for the type of interface you are
connecting to. To change the channel number, select the
channel you want to configure from the Select Channel
list.
6. The Interface group defaults to FXS (Loop Start). Select
the interface option to correspond to the interface type
being connected to the Voice/Fax connector on the back
panel of the MultiVOIP.
If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System