Motorola PM400 - Manual (Page 44)

42
English
PHONE
5 Your dealer/programmer can preprogram your
radio in one of three ways to enter your
access code to the repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Enter your access code using the
DTMF microphone keypad and press the PTT
button.
6 Hold the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press and hold
the PTT button to talk. Release the PTT but-
ton when the other party wants to talk, both
parties will need to speak in turn.
7 To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 8.
– or –
Enter the deaccess code using the DTMF
microphone keypad and press the PTT
button.
8 To exit Phone Mode:
Press the preprogrammed Phone button (see
page 18).
– or –
Press and hold
C to disconnect the call.
Note: D disappears from the display.
05_Phone.fm Page 42 Monday, August 2, 2004 3:22 PM