Motorola PM400 - Manual (Page 36)

34
English
SCAN
START SYSTEM SCAN G
Press the preprogrammed Scan button to start
System Scan (see page 18).
– or –
STOP SYSTEM SCAN
Press the preprogrammed Scan button to stop
System Scan (see page 18).
– or –
Note: Your dealer/programmer can preprogram
your radio when exiting System Scan to
automatically revert to the last scan
channel/talkgroup that had activity on it
or to automatically revert to the channel/
talkgroup where scan was initiated.
1
G
or
H
to select a channel/talkgroup that
contains a Scan list.
2 D to enter menu mode.
3
G
or
H
until
4 D to select
The display shows the current scan status.
5
G
or
H
until
6 D to select the current setting.
SYS SCAN
SYS SCAN
SCAN ON
1 D to enter menu mode.
2
G
or
H
until
3 D to select
The display shows the current scan status.
4
G
or
H
until
5 D to select the current setting.
• The Gsymbol disappears from the
display.
SYS SCAN
SYS SCAN
SCAN OFF
04_Scan.fm Page 34 Monday, August 2, 2004 3:09 PM