Radio calls, Selective radio inhibit – Motorola PM400 User Manual

Page 31

English

RA
DIO CA

LLS

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from the base
station.
This feature is commonly used to disable
radios:
• In case of theft
• When your vehicle is being serviced
• For system control reasons
When your radio has been rendered
inoperative by the base station, all controls will
be inoperative except for the On/Off/Volume
knob and the display shows INHIBIT.

RECEIVE A SELECTIVE CALL F

(CONVENTIONAL OPERATION ONLY)

When you receive a Selective Call:

• The display shows F and the prepro-

grammed name or ID of the calling radio.

• The yellow LED indicator flashes, if pro-

grammed by your dealer/programmer.

• You hear two high-pitched tones.

To acknowledge the call, press and release the
PTT button.

Press and hold the PTT button to talk; release
to listen.

03_RadioCall.fm Page 29 Monday, August 2, 2004 3:01 PM