Meyer Sound 600-HP - Manual (Page 34)

28
CHAPTER 7
Figure 7.17. Three 600-HP on the MDB-600 with strap
NOTE: For safety reasons and to avoid any
damage to the enclosures, use straps (as
shown in Figure 7.17) when transporting a stack, es-
pecially if the cabinets are not fitted with the MRF-
600 rigging frame. The MDB-600 includes slots on
the sides for this purpose.
In addition to transport, the MDB-600 supports 600-HP
subwoofers in a ground-stacked configuration.
CAUTION: When using the MDB-600 dolly
board to ground-stack 600-HP subwoof-
ers, make sure all four caster wheels are blocked to
prevent the stack from rolling away.
Other rigging accessories as well as a range of rugged
protective transport covers are also available. For more
information, please visit www.meyersound.com.