Meyer Sound 600-HP - Manual (Page 14)

8
CHAPTER 2
ELECTRICAL SAFETY ISSUES
Pay close attention to these important electrical and safety
issues.
CAUTION: Do not use a power cord adapter
to drive the 600-HP subwoofer from a
standard three-prong Edison outlet since that
connector is rated for only 15 amps (NEMA 5-15R;
125 V AC max.).
CAUTION: The 600-HP subwoofer requires a
ground connection. Always use a grounded
outlet and plug.
TIP: Use the ring located on rear of the
600-HP subwoofer to provide strain relief for
power and signal cables. Do not use this ring for any
other purpose.