Metra Electronics 99-8715 - Manual (Page 5)

99-8715 KIT ASSEMBLY
3
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio. (Figure A) 1
Slide the radio/bracket assembly into
the radio housing until it snaps into
place. (Figure B) 2
Snap the Trim plate onto the front of
the radio housing. (Figure D) 4
Continue to final assembly.
A
B
C D
Note: Refer also to the instructions included with the aftermarket radio.
ISO MOUNT RADIO PROVISION WITH POCKET
Snap the pocket into the radio hous-
ing. (Figure C) 3