Metra Electronics 99-8715 - Manual (Page 3)

99-8715 DASH DISASSEMBLY
SMART FORTWO 2008-10
A
B
C D
1
D isconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Unclip the Hazard button switch panel.
(Figure A) 2
Remove (1) T-20 Torx head screw.
(Figure B) 3
Carefully unclip the panel surrounding
the radio, start at the top of the dash
and work your way down. (Figure C) 4
Remove (4) T-20 Torx head screws
from around the radio. (Figure D) 5
Remove radio and disconnect the
wire harness and antenna. 6
Continue to kit assembly.