MITSUBISHI ELECTRIC G-50A - Manual (Page 44)

-42-
Overall status lamp
Shows the operation panel, screen, etc. for user operation.
ON …During operation
Collective operation switch
OFF …All group are stopping
BLINKING…Malfunction
Appendix 2 : User operation (abridged)
Initial setting
menu
User operation menu screen
Operation setting screen
Operation monitor screen
* To initial setting
• Local remote control operation prohibition setting
• Start/Stop, mode, set temperature, etc.
*The following settings are possible using the
Operation Panel switches
Reverse : ON
Blinking : Malfunction during unit off
Blinking and Reverse : Malfunction during unit is on
• : Change the display group
• : Turn all the units in that group ON or OFF
• : Set the displayed group unit in indicated by the " " symbol
to the ON/OFF mode.
• : Move the " " symbol.
Normal : OFF
+
Blinking "MON."
Function area
MON. : MONITOR
PROH. : PROHIBIT
COL. : COLLECTIVE
M. : MEMORY
MR. : MEMORY READ
Continously press and
( 2 seconds or longer )
1
2
GROUP
SELECT
BACK
SCREEN
BACK
SCREEN
BACK
SCREEN
BACK
SCREEN
1
ON/OFF
1
ON/OFF
3
G-50A
ON/OFF
CENTRAL CONTROLLER
TEST RUN
PATTERN
CLOCK/
VENTILATION
DIRECTION
AIR
TIMER
MODE
REMOTE PROHIBITION RESET
FAN SPEED MODE ON/OFF
TEMP.
ENTER
BACK SCREEN
SELECT
GROUP
INS.
DEL. 0
9 8 7
6 5 4
3 2 1
MENU
1 OPERATION MONITOR
2 OPERATION SETTING
3 SCHEDULE SETTING
4 MALFUNCTION
MONITOR
5 CURRENT TIME
SETTING
WED 15:29