MITSUBISHI ELECTRIC G-50A - Manual (Page 24)

-22-
Press the (CLOCK/PATTERN) switch to select P1 to
P4 or ( - ).
Press the switch one time to complete the setting.(The cursor
will move to the next setting position. )
Repeat operations and to assign the schedule pattern to each
day.
When the No.4 function setting is set ON, P4 cannot be set.
• The schedule pattern P1 to P3, weekly schedule pattern, set-back value or setting temperature of one group
• Correction and modification can be easily performed after the copy operation is completed.
Display the original group on the weekly schedule setting screen.
Press the switch to move the cursor to "M" .
Press the switch one time to record the setting date in memory.
*To erase date from the memory, return to the user operation menu
screen.
"M" is displayed in reverse with blinking.
Press the switch to select the group to which the data is
to be copied.
Press the switch to move the cursor to "MR" .
Press the switch to set the contents which will be the same as the
setting data in memory.
The same contents are displayed.
The contents stored in memory can be copied to other groups any number
of times because these contents will not be erased even if the memory read
operation is used.
can be recorded and copied to memory or to another desired group.
(4) Copying schedule content to other groups
(memory,memory read)
NOTE:
GROUP
SELECT
ENTER
ENTER
ENTER
1
2
3
3
3
4
4
4 5
5
6
7
/
5 8