MITSUBISHI ELECTRIC G-50A - Manual (Page 25)

-23-
4 - 4 Malfunction
• The malfunction monitor function is used for conforming to the details of the malfunction condition when a
malfunction is displayed on the operation monitor screen.
• The malfunction monitor function can display data describing up to nine malfunctions in the address number se-
• After checking the unit address where the malfunction occurred and the error code, please contact your dealer
or technical representative as soon as possible.
Press the switch to Press the switch to go back
to the user operation menu screen.
The unit address
Error code
Page change operation
Malfunction reset operation
When there is no malfunction taking place, [ NO ERROR ] lights up instead of [ ERROR CODE ].
The page change operation is performed by the switch.
Pressing the or switch shows the current display page +1.
Pressing the or switch shows the current display page -1.
Press the reset switch to reset all malfunctions.
The reset operation can be performed on any page.
The unit address
where the malfunction occurred
NOTE :
When operation of the G-50A is prohibited, reset operation is invalid. NOTE :
where the malfunction was detected
select "4 MALFUNCTION MONITOR".
< Shifting to the malfunction monitor screen >
quence on one page. This data contains the unit address where the malfunction occured, the error code and the
unit address where the malfunction was detected.
4 BACK
SCREEN
DEL.
RESET