MITSUBISHI ELECTRIC G-50A - Manual (Page 17)

-15-
(2) G-50A operation prohibition
(3) Using the function area
• The operation of this controller is prohibited when an operation prohibition setting for this controller is received
from a system controller other than this controller or when an external input signal is used.
The is displayed and the prohibition operation is display in re-
verse display when operation of this controller is prohibited by another
system controller or an external input signal used.
The prohibition operation which is displayed in reverse display is not
possible to operate in this condition.
To select the function from the function area, use the or switch to move the cursor to the blinking to
the function of your choice and press the switch. The current cursor position appears as a blinking indication
on screen.
• MON. (MONITOR) : Shift to the operation monitor screen
• PROH. (PROHIBIT) : Shift to the prohibit setting screen
• COL. (COLLECTIVE) : Shift to the collective operation setting screen
• M (memory) : Stores the setting currently shown on the screen in memory.
• MR (memory read) : Reads the setting stored in memory and activates them for the currently dis-
played group.
ENTER
PROHI-
BITED