Miele DAG 1000 - Manual (Page 4)

~
d) Before connecting the appliance
to the power supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply.
This data must correspond to prevent
appliance damage. If in doubt consult a
qualified electrician.
~
e) Installation work and repairs
should only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and other work by unqualified
persons could be dangerous.
~
f) Only open the housing as
described in the "Cleaning and care"
section of this manual. Under no
circumstances should any other parts
of the housing be opened. Tampering
with electrical connections or
components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~
g) Before discarding an old
appliance, disconnect it from the power
supply and remove the power cord.
Use
,WARNING
TO REDUCE THE RISK OF A
COOKTOP GREASE FIRE:
~
a) Never leave surface units
unattended at high settings. Boilovers
cause smoking and greasy spillovers
may ignite. Heat oils slowly on low or
medium settings.
~
b) Always turn the ventilation system
on when cooking at a high heat.
~
c) Clean the ventilation system
frequently. Grease should not be
allowed to accumulate on the fan or
filter.
~
d) Use the proper pan size. Always
use cookware appropriate for the size
of the cooking area.
~
e) Do not flambé or grill with an
open flame beside the ventilation
system.
Flames could be drawn into the
ventilation system by the suction and
the grease filters may catch fire.
IMPORTANT SAFETY INSTRUCTIONS
4