Miele DAG 1000 - Manual (Page 27)

^ With the assistance of another
person, lift the appliance into the
prepared cutout. The top mounting
brackets should rest on the
countertop.
^ Secure the appliance to the
countertop with 2 screws.
Alternatively, or additionally, the
appliance can also be attached
underneath the countertop with the
angle brackets provided.
^ First, loosely screw the brackets into
the sliding nuts in the housing, then
push them up under the countertop.
^ Now tighten the brackets on the
housing.
^ Carefully pre-drill the mounting holes
into the countertop from underneath.
Using screws of the appropriate
length.
^ Level and align the appliance.
^ Push the bottom mounting bracket on
each side down against the cabinet
floor.
Mark the top edge of the mounting
bracket on the housing and the
mounting holes on the cabinet floor.
Installation
27