Mercedes-Benz 2005 G 500 - Manual (Page 343)

343
Practical hints
Replacing bulbs
̈ Loosen and remove securing
screws
1.
̈ Remove lamp lens 2.
̈ Press gently onto bulb 3 and turn
counterclockwise out of its bulb
socket.
̈ Press new bulb 3 gently into the bulb
socket and turn clockwise until it
engages.
̈ Reinstall lamp lens 2.
̈ Install and tighten securing screws 1.
License plate lamp
1 Securing screw
2 License plate lamp lens (with bulb
socket)
3 Tubular bulb
̈ Loosen and remove securing
screws
1.
̈ Remove license plate lamp lens 2.
̈ Replace tubular bulb 3.
̈ Reinstall license plate lamp lens 2.
̈ Install and tighten securing screws 1.
i
Do not overtighten securing screws 1.
Otherwise lamp lens 2 could be dam-
aged.
i
Do not overtighten securing screws 1.
Otherwise license plate lamp lens 2
could be damaged.