Mercedes-Benz 2005 G 500 - Manual (Page 137)

137
Controls in detail
Control system
Selecting display (speed display or out-
side temperature)
̈ Move the selection marker with
the
æ or ç button to the
INSTRUMENT CLUSTER submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SELECT DISPLAY .
The selection marker is on the current
setting.
̈ Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the LIGHTING submenu via the
SETTINGS menu. Use the LIGHTING sub-
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the
æ or ç button to the
LIGHTING submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
LIGHT CIRCUIT HEADLIGHT MODE .
Function Page
Setting daytime running lamp
mode (USA only) 137
Setting locator lighting 138
Setting night security
illumination 139
Setting interior lighting delayed
shut-off 140
i
This function is not available in coun-
tries where the daytime running lamp
mode is mandatory and therefore in a
constant mode.
୴୴