Mercedes-Benz 2005 G 500 - Manual (Page 337)

337
Practical hints
Replacing bulbs
Removing
̈ Loosen and remove securing
screws
1.
̈ Remove headlamp trim panel 2 and
seal.
̈ Loosen and remove headlamp-securing
screws
4.
̈ Remove headlamp 3.
Installing
̈ Insert headlamp 3 and install and
tighten headlamp-securing screws 4.
̈ Install headlamp trim panel 2 and
seal.
̈ Install and tighten securing screws 1.
Headlamp bulbs
1 Protection cover
2 Electrical connector for parking and
standing lamp bulb
3 Electrical connector for high and low
beam bulb
4 Retainer spring
5 High and low beam bulb
6 Parking and standing lamp bulb socket