Motorola Digital Cordless Telephone with Digital Answering Machine D511 - Manual (Page 23)

Base settings 23
3. Press
u
or
d
to select TONE DIAL or PULSE DIAL and press
m
to confirm.
6.5 Restore default settings
You can restore your D5 to its default (original) settings.
All the handsets that are registered to the base will be
retained.
WARNING
Resetting your phone to its default settings will delete all
entries in the Phonebook and Calls list. All handset and base
settings will also be reset.
1. Press
m
, scroll
d
to SETUP and press
m
.
2. Scroll
d
to DEFAULT and press
m
.
3. Enter the 4 digit PIN code (default = 0000) and press
m
.
The display shows CONFIRM ? .
4. Press
m
to confirm or
n
to return to the previous
menu. Your D5 will restart automatically.
6.6 Emergency default
If you have lost your PIN code, you can still restore your D5
to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
*
while replacing the batteries.
The display shows DEFAULT .
3. Press
m
to confirm. Your D5 will restart automatically.
6.7 Eco mode
Your D5 offers ECO mode function which reduces the
transmitted power and energy consumption when switched on.
To switch Eco mode on:
1. Press
m
, scroll
d
to SETUP and press
m
.
2. Scroll
d
to ECO MODE and press
m
.
3. Press
u
or
d
to select ON or OFF and press
m
to
confirm.
When Eco mode is switched off, the circle around
disappears.
NOTE
When ECO mode is set to ON, the handset range will be
reduced.
Eco mode
ON
Motorola_D5_TAM_IFU_EN_UK.book Page 23 Wednesday, September 1, 2010 10:16 AM