No disc display – Meridian America 506 User Manual

Page 27

Setting up the CD player

There is interference on the radio and/
or television when the CD player is
switched on

Before following the steps below, ensure all units are switched

off first.

If this equipment does cause or suffer from interference to/from

radio or television reception then the following measures should

be tried:

❍ Reorient the receiving aerial (or antenna) or route the antenna

cable of the receiver as far as possible from the 506 24-Bit CD

Player and its cabling.

❍ Ensure that the receiver uses well-screened antenna cable.

❍ Relocate the receiver with respect to the CD player.

❍ Connect the receiver and this product to different AC outlets.

The display shows No disc when
attempting to play a disc

❍ Check that the disc is positioned correctly in the drawer, with

❍ Try playing another disc. If this disc works, check the problem

disc for signs of dirt or damage.

The display shows Error when
attempting to programme a disc

❍ Check that the disc includes the track number you are

attempting to programme.

❍ Check that you have not already programmed 31 tracks, the

maximum number.