Meridian America 506 - Manual (Page 15)

Using the CD player
10
Programming a selection
With the remote you can programme a selection of tracks, and
then play only those tracks you have programmed.
You can programme a selection either by storing the tracks you
want to play, or by clearing the tracks you do not want to play. If
you programme a selection by storing the tracks you want to
hear, you can play the tracks in any order and repeat tracks in
the sequence.
You can programme a selection while the disc is playing, in
which case the selection will be played after the current track
finishes.
Attempting to programme more than
31 tracks will display an error warning:
Error
To choose a track to programme
● Press Next or Previous to step through the track numbers
until the track you want is displayed, or type the number of
the track you want.
To programme by specifying the
tracks you want to play
● Choose the first track you want to play, as described above.
The display will show the track
number; for example:
Track 14
● Press Store (remote only).
The display will change to:
Store 14
You should store the track within two seconds, or it will begin to
play.
The track will be labelled Store.
All the other tracks are initially programmed not to play, and will
be labelled Clear.