Meridian America 506 - Manual (Page 24)

Setting up the CD player
19
To connect to a 501 Control Unit
COMMS COMMS
500 comms lead
CD OUTPUT
501 Control Unit 506 24-Bit CD Player
Audio lead
● Connect the sockets marked OUTPUT L and R on the back
panel of the CD player to the CD input on the back panel of
the 501 Control Unit.
To connect to a conventional
preamplifier
● Connect the sockets marked OUTPUT L and R on the back
panel of the CD player to an appropriate input on your
preamplifier.
You should consult the manufacturer’s manual to determine
which input to use, but generally it will be labelled CD or AUX.
You should either use a twin-screened audio cable, or a pair of
single-screened audio cables. These cables can have a
considerable effect on the quality of the sound, and you are
advised to seek your dealer’s advice on the best type of cables
for your system.