Multi-Tech Systems MVP400 - Manual (Page 58)

MultiVOIP Quick Start Guide
58
22. Select the Save Current Setup as User Default
Configuration and click OK. The Writing Setup dialog box
displays as the setup configuration is written to the
MultiVOIP 400/800.
After the setup is written to the MultiVOIP 400/800, it
reboots.
23. Check that the BTG LED on the MultiVOIP 400/800 is off
after the download is complete. This may take several
minutes as the MultiVOIP 400/800 reboots.
24. You are returned to the Main menu.
Your MultiVOIP 400/800 is operational at this time.
Repeat the process for each of the slave units. When all
slaves have been configured, go to the “Deploying the
Network” section.