Magellan 310 - Manual (Page 51)

Reference
Accessing Waypoints in the Database — All stored waypoints, whether
user-input or preloaded, can be found in the Waypoint Database. You
will need to access waypoints in the database whenever you are editing
waypoints, activating a GOTO route or creating a multileg route.
Any
MENU Highlight
Database
Use up/down
“Find By”
ENTER
ENTER
From
Screen
arrows to select
category
Use left/right
arrows to select
Selecting Waypoints from the Nearest List.
If Near Position, Near City or Near Cursor is
selected as the “Find By” option for the database
or if User was selected as the category, you will
be presented with a list of waypoints that you
can choose from. The information at the bottom
of the screen indicates the bearing and distance
to the highlighted waypoint from your present
position.
Use up/down
arrows to highlight
waypoint
ENTER
Selecting Waypoints from the Alphabetical List.
If Alphabetical is selected as the “Find By” option
for the database a slightly different screen from the
Nearest list is displayed. A keyboard is graphically
displayed allowing you to enter the name of the
waypoint or map object you are looking for. You
need not enter the entire name, just enough letters
to narrow the search down. (A minimum of four
characters is recommended.) Selecting “OK” and pressing enter brings
up a listing of the waypoints, starting with the one you entered at the
top.
Note: When selecting the User category, the Meridian does not use the
keyboard display.
Magellan Meridian GPS Receiver 41