Magellan 310 - Manual (Page 36)

Reference
MENU Highlight
Select Map Info
highlight
ENTER
ENTER ENTER
From
the MAP
Screen
Use U/D arrows to
Customize Fields
Use L/R arrows to highlight
the title for the data field
Use arrows to
select new data
to be changed type
Bearing
destination.
When the
destination.
VMG
destination.
course.
This the local time that you will arrive at your
ETE
Local time.
Date
Available Data Options
This is the direction to your destination from your present position, in
degrees, from North.
Distance This is distance (measured in the Nav Units selected in Setup) to your
Speed This is the rate that you are travelling. The unit of measure is selected in
Setup - Nav Units.
Heading This is the direction you are moving (measured in degrees).
heading and bearing are the same, you are travelling on a direct line to your
(Velocity Made Good). This is the speed that you are getting closer to your
If the heading and bearing are the same, then VMG will be the same
as Speed since all of the speed that you are travelling is being applied to arriving to
your destination. However, if you are off course, your VMG will be less than the
speed that you are travelling.
CTS (Course To Steer). This is the angle that you need to turn to put you back on
ETA (Estimated Time of Arrival).
destination based on the rate of speed that you are moving to your destination.
(See VMG.)
(Estimated Time Enroute). This is how long, in time, that it will take you to
arrive at your destination based upon your present speed to the destination.
XTE (Cross Track Error). XTE is the perpendicular distance from your present
position to the course line you should be on to go to your destination.
Turn This is the direction you need to turn to put you on the shortest distance to
your destination from your present position.
Elevation This is the distance above sea level that you are presently at.
Time
Current date.
26 Magellan Meridian GPS Receiver