MITSUBISHI ELECTRIC LT-37131 - Manual (Page 86)

86 Chapter 7. Using IEEE 1394 Devices
The TV Remote Control and IEEE
1394 Devices
If the 1394 cable box or satellite receiver provides guide
information for 1394 content:
• For compatible satellite receivers and some cable
boxes, the TV remote control GUIDE key displays the
on-screen programming guide for the receiver or cable
box. Press and
ENTER to navigate the dis-
played program guide.
• For satellite receivers, you may also be able to use the
numbers or other additional buttons.
• For an IEEE 1394 cable box or satellite receiver, you
can also try using the CABLE/SAT position of the TV
remote control to see if it can operate the device. If
not, use the remote control that came with the device.
Operation of IEEE 1394 Devices with the TV’s Remote Control
(slide switch set to TV position)
Device
CABLE/SAT A/V DISC DVCR
AMPLIFIER
(some MPEG2 models
only)
Remote Con-
trol Key
POWER Power the device on/off when highlighted in the Input selection menu. See the instructions above.
CH / Channel up/down
Page up/down
(when track list is displayed)
Index search forward/
reverse
(if supported by DVCR)
VOL / Volume Up/Down
MUTE Mute On/Off
0-9 (DIGITS) Number functions
Search by time
(when followed by ENTER)
QV Last Channel Recall
EXIT Exit menus/displays Exit menus/displays Exit menus/displays
ENTER Enter or select Enter or select Enter or select
CANCEL Cancel function Delete recording from Track List
Cancel function or
counter reset
GUIDE
Digital-channel guide
(may need to press
twice)
Display Track List.
Up/down/left/right
Skip Forward 30 seconds during
playback
Skip Backwards 12 seconds during
playback
Skip to end or beginning of program
Up/down in track list
Up/down/left/right
PLAY Play Play
STOP Stop Stop
RECORD Record Record
REV Reverse picture scan or Slow Play Reverse or Slow Play
FFWD Fast picture scan or Fast Play Fast Play
PAUSE Pause Pause
To Power On or Off a Compatible IEEE 1394
Device
1. Press INPUT to open the Input Selection menu.
2. Move the highlight to the icon for the device. There is
no need to press ENTER.
3. Press POWER.
4. Press EXIT to return to TV viewing.
Or: press ENTER to switch to the highlighted device.