Back and side panels, continued – MITSUBISHI ELECTRIC LT-37131 User Manual

Page 19

Chapter 1. Television Overview

4. AVR OUT

(Audio only)

AVR OUT (AUDIO/ViDEO RECEIVER OUT) L/R jacks

send analog audio of the program currently shown on
the screen to an A/V surround sound receiver or stereo
system. Digital audio from digital channels, FireWire®

(DTVLink/IEEE 1394) devices and HDMI devices is con-
verted to analog audio by the TV. If using an analog A/V

receiver or stereo system, this is the only audio connec-
tion needed between it and the TV.

5. MONITOR OUTPUT

Use these composite video and left/right audio jacks
to send analog video and audio signals to an external

recording device such as a VCR. The signals from these
jacks are from the program currently being viewed on the

TV screen.

To make recordings from this output, the

TV must be in normal full-screen mode rather than in

Split-Screen mode.

• From this output you can record audio and video

signals from

ANT 1, ANT 2, INPUT 1-3, and

IEEE 1394 devices.

• Digital signals from

ANT 1, ANT 2, and IEEE

1394 devices are converted to analog video and

audio signals.

• Some signals cannot be recorded because of

copy-protection flags in the content.

• Video signals from devices connected to

COM-

PONENT 1 & 2, HDMI 1 & 2 or PC DVI are
not available from these

MONITOR OUTPUT

jacks.

6. HDMI/DVI AUDIO

Audio for HDMI 1 & 2: Use these analog audio inputs

when connecting DVI devices to the TV’s

HDMI jacks.

Unlike HDMI, DVI does not carry audio information on the
same cable.

For analog audio from a personal com-

puter, use the PC-DVI AUDIO jacks instead.

Back and Side Panels, continued

Back Panel 1

Back Panel 2

ANT 1/MAIN

(Located next to DIGITAL

AUDIO OUTPUT jack)

ANT 2/AUX