Metra Electronics 99-1005 - Manual (Page 5)

3
99-1005 KIT ASSEMBLY
B
C
A
DIN RADIO WITH POCKET PROVISION
Mount the rear support bracket to the
back of the pocket using the remaining
(2) screws supplied with the kit.
(Figure A) 2
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.
Mount the pocket to the back of the
radio housing using (2) of the screws
supplied with the kit. (Figure A) 1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward. (Figure B) 3
Slide the aftermarket radio into the
cage until it snaps into place. (Figure C) 4
• Spectra only skip to final assembly.